Brand Specific Forums > Bullfrog Spas
Need help!! initial priming Bullfrog x7 no water flow
Jacuzzi Jim:
That would be to easy. You can also open the front and check the air bleeder lines coming off the end of the pump. I have seen a few on the showroom where the bleeder hose is not higher or hanging above the pump itself, so the air can't bleed out and do what it is designed to do.
tmaestas95:
--- Quote from: Jacuzzi Jim on January 18, 2017, 06:02:06 pm --- That would be to easy. You can also open the front and check the air bleeder lines coming off the end of the pump. I have seen a few on the showroom where the bleeder hose is not higher or hanging above the pump itself, so the air can't bleed out and do what it is designed to do.
--- End quote ---
Interesting - my hose on pump 2 definitely droops down lower than the pump before it runs up into the connection in the shell under the cool-down seat. Next time I have the front open I'll see if I can hang it up somewhere.
Navigation
[0] Message Index
[*] Previous page
Go to full version