Brand Specific Forums > Bullfrog Spas
Need help!! initial priming Bullfrog x7 no water flow
Jacuzzi Jim:
It is odd your dealer did not know what was going on. I have had a handful of BF spa's airlock like that, should not do it again when you do a water change, but I always tell people to stick the hose in the filter holes when filling.
Skysurfer2010:
He did tell me to fill it with the hose in the filter area and to remove the filters. I had the hose directly in the tubing beneath the filter and had all the Jets in the full open position. Still got a ton of air for whatever reason. Just glad it was sorted out.
Hottubprosne:
Sorry did not mean to come off as negative. If you have any problems with it again when you take the hoses off turn them so they are up makes all the difference.
Tman122:
--- Quote from: Skysurfer2010 on January 11, 2017, 05:04:52 pm ---He did tell me to fill it with the hose in the filter area and to remove the filters. I had the hose directly in the tubing beneath the filter and had all the Jets in the full open position. Still got a ton of air for whatever reason. Just glad it was sorted out.
--- End quote ---
Sometimes when they are tipped on their side just right an air lock is created when you tip it down. Common problem. Don't tip it up anymore.....LOL
Beck0101:
One more tip - when you change your water don't drain it 100% empty. Drain it down to the top of the foot well but leave the foot well full.
Keep those lines from fully emptying and you'll save yourself a lot of drama during water changes. Not to mention the fact that you have to remove your cover lifter to access your pluming. Not ideal if you can avoid it...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version