Brand Specific Forums > Marquis Hot Tubs
Marquis Reward not working anymore...
mike159sw:
@ MarKee, I've checked it at all possible ,measure points. There is at several point 220 V.
I didn't notice that it is tripping the breaker. I'm getting more and more convinced that I need to replace the motherboard :-\
Hottubguy:
--- Quote from: mike159sw on June 30, 2015, 03:01:02 am ---@ MarKee, I've checked it at all possible ,measure points. There is at several point 220 V.
I didn't notice that it is tripping the breaker. I'm getting more and more convinced that I need to replace the motherboard :-\
--- End quote ---
Just for the hell of it try replacing the fuses and see what happens. The situation you are describing is a fuse 90% of the time if not more
Jacuzzi Jim:
Even if I thought it wasn't the fuse, I would replace it and see before buying a 300 dollar board.
Nessuno:
Not familiar with Marquis, but a few suggestions. Can you check to see if there is power to the control panel? Should be a place on the main board where it plugs in that you can use your meter on. With no power to your control panel/display, there will be no way for the motherboard to logically give power to the pumps/heater. Again, not familiar with Marquis.
MarKee:
It's rare for PC boards to go bad, but it's possible. If there is a local Marquis dealer I would pay them to come out and diagnose it before spending the money on a new PC board
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version