Brand Specific Forums > Jacuzzi Hot Tubs

jacuzzi j345 FL1 error

(1/3) > >>

leadfoot33:
hey ladies and gents, my parent hot tub is getting the fl1 error code, cant seem to get rid of it, we have tried resetting the power and leaving it off for a while and what not. the code comes on immediatly when turning the main power on, i have held my hand near the filter whole with the screen to feel for suction and i dont get any unless one of the main pumps is on. the flow switch doesnt seem to move its position (i would call it the open position, no contact is being made from the finger to the solid part.) and i dont think the circ pump is on cant feel anything from it at all. any other test i should do to narrow it down to circ pump or flow switch?
Thanks for your help
Logan

Jacuzzi Jim:
 Pretty much answered your own question.   Bad circ pump.   6000-125 Google is your friend..   Unless it's the board...  But doubtful.

leadfoot33:
thanks jim, i got multiple different answers online when i googled this half were argueing about flow switch temp sensor or circ pump with noone posting a conclusion.
Thanks :)
Logan

Jacuzzi Jim:
 Only test I would suggest is confirming that 220v is being sent to the circ pump. 

leadfoot33:
good news, new circ pump is working correctly, bad news still an fl1 code. what do we look at next? flo switch? but im not sure what position its supposed to be in, its just what i would call the open position (not contact being made with the other side)
any ideas is great
thanks in advance

Navigation

[0] Message Index

[#] Next page