Brand Specific Forums > Jacuzzi Hot Tubs

Jacuzzi 2005 J375 not working

(1/2) > >>

pologuymanager:
I installed a flow switch and all was well for a month now the flow and circulation are on with NO heat so cool sensor is also on!!!:(
last year changed out the circulation pump but never did the heater!! Could the heater have finally gone out now??
Seems like its all going on now that I changed out the flow switch!!
Thank you

Jacuzzi Jim:
 It's possible, check and see if there is 220 running to the heater.   If so it's a bad heater.   Make sure also it's in std mode and not economy. 

pologuymanager:
As always you are wealth of knowledge !!
I will check later and let you know!
Would the heater be the result of all the other issues coming on the display?

Jacuzzi Jim:
 No.   

  Right now you have no error codes and circ pump is running as it should, just no heat? 

pologuymanager:
No my error codes say flo/cool
I just put the flow switch in and now flo/cool comes on
Thanks Jim

Navigation

[0] Message Index

[#] Next page