Brand Specific Forums > Hot Spring Spas

Hot Spring Grandee 2008 lost power now no heat

<< < (2/2)

Isaac-1:
Local dealer was out of stock so I ordered an e5 hot spring pump off ebay for $171 mine came from a dealer in nc but they may be snowwed in now.

Chiadrum:
Ok thanks for that.
Update-while scouring the web I came across a post that suggested pouring Muriaric Acid (Hope I spelled that right){AKA Hydrochloric Acid,available at Lowe's-8 bux} down the gray main filter tube that connects to the Circ Pump.I turned off the tub completely and poured a generous amount-probably too much-down the tube,waited for an hour and fired up the tub again.
To my dismay,the tub went right back to all LED's fast flashing again right away.On my way back inside I tapped the "Clean" button to run the tub's clean cycle but I went to bed ready to order a new Circ pump in the morning.
I went outside this morning to check the tub and to my pleasant surprise both LED's were solid and happy and the tub temp was right at 99 degrees as programmed!
No idea of the long term results of this fix obviously but I will report back occasionally.Very interested to see how much time this buys me.

Navigation

[0] Message Index

[*] Previous page