Brand Specific Forums > Hot Spring Spas

2013 HS Grandee W/ ACE Salt Progress Real Life results

<< < (9/13) > >>

Ryan VSO:
Those Products are great when use corectly :)

Sam:

--- Quote from: dunecritter on March 19, 2014, 11:20:30 pm ---..... I'm not adding any bottled sanitizers or chemicals other than balancing my PH with PH Down a few times. So far so good! ;D

--- End quote ---

Adding bottled sanitizers takes all of 10 seconds and you don't have to regularly clean the cell or spend the initial $1,500 for the system.  Why do people act like hot tub water care is so difficult and time consuming?

dunecritter:

--- Quote from: Sam on March 20, 2014, 03:57:05 pm ---
--- Quote from: dunecritter on March 19, 2014, 11:20:30 pm ---..... I'm not adding any bottled sanitizers or chemicals other than balancing my PH with PH Down a few times. So far so good! ;D

--- End quote ---

Adding bottled sanitizers takes all of 10 seconds and you don't have to regularly clean the cell or spend the initial $1,500 for the system.  Why do people act like hot tub water care is so difficult and time consuming?

--- End quote ---
Because going to the garage to get the chemicals after each and every soak, Running the clean cycle after every time I add chemicals to properly mix in the system, Shocking with Bottled chlorine every week, Replacing a Silver Ion Cartridge every 4 months at $35 bucks a wack, and having to smell the nasty chlorine and not having the smooth and silky water like I have now with the salt system.....SUCKS!!! ABSOLUTELY SUCKS!  I don't ever have to worry about "Shocking my tub" I can basically forget about it for a month or better at a time and still have bath ready water right now every time. That's why....Not to mention that I'm going on 6 month old water that looks, Smells and feels as great as the water did the day I put it in....No more 3 month water changing for me....You may enjoy that maintenance schedule Sam....I don't.

dunecritter:

--- Quote from: kurt6137 on March 04, 2014, 09:34:36 pm ---I have a question for you Dunecritter, I have a 2013 Hot Springs Sovereign, that I do not have the salt system, it runs great, but i chose not having the salt system, due to the fact it was so new and chlorine definitely works and no issues to deal with like problems with hardware and running the system. My question, can I add a salt system to my Sovereign down the road, if I like and how hard is it to install, could I do it myself ?  I don't think, I would want to, due to the fact , if it breaks, probably is not covered, let me know, thanks Kurt.

--- End quote ---
Hey Kurt, You can certainly install the ACE system on your 2013 Sovereign at any time yourself...The directions are very clear and simple. Installing it yourself really is easy and if you need any help....The forum is great to help answer any questions. BTW...Install takes all if 15-20 min is all. I have installed many and you can PM me if you ever needed any help.

Tman122:

--- Quote from: dunecritter on March 01, 2014, 12:25:08 pm ---Well Its been awhile since I've had a chance to hop in the tub (almost 2 weeks as I painted my home as I  have been bzy with that and work) and I intentionally did nothing with it regarding to even opening the cover during this time. Well yesterday I opened the cover and tested my water with regular test strips and as expected...water was good...still clear with absolutely no smells to speak of...once tested I noticed the sanitizer levels were perfect and the softness was good but like normal.. The PH and Alk has creped up and required a touch of PH down to get it  back in range. That's it, so far so good. I have yet to clean my cell (Manufacture recommends every 3 months and I'm at 5 months now) so I decided to dip the cell in a PH Down solution for a 10 Min and was surprised to see no bubbles from the cleaning process. I looked down the cell and I cannot see any deposit buildup on it yet so maybe It will be more necessary as the cell gets aged with more time/use in the water. One annoying thing as this was the first time cleaning the cell and I put too much water in the PH solution bottle so when I submerged the cell I had excess spillage...so I quickly grabbed the hose to dilute the solution. Clearly a rookie mistake that won't happen again.
//i190.photobucket.com/albums/z59/bzyguy01/20140228_100425_zps29e1e5bf.jpg[/img][/URL]

--- End quote ---

Get yourself a re-agent test kit bud. Learn how to use it. 10 people can look at strips and get a different reading. Scoop a little water and go do it in your kitchen by the sink

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version