Brand Specific Forums > Jacuzzi Hot Tubs
Jacuzzi UK don't sell ozonators anymore.
TwinCitiesHotSpring:
--- Quote from: Spoiledrotten on July 10, 2013, 12:27:25 pm ---JJ, what about the cleaning of the ozonator? My dealer advised me to clean it periodically with vinegar. Do you advise your customers to do that same?
--- End quote ---
not going to answer for Jim but yes this is a very common solution to "clogged" ozone check valves...you can either use a little vinegar or dilute some spa down into liquid form and use that
Jacuzzi Jim:
--- Quote from: TwinCitiesHotSpring on July 10, 2013, 12:29:33 pm ---
--- Quote from: Spoiledrotten on July 10, 2013, 12:27:25 pm ---JJ, what about the cleaning of the ozonator? My dealer advised me to clean it periodically with vinegar. Do you advise your customers to do that same?
--- End quote ---
not going to answer for Jim but yes this is a very common solution to "clogged" ozone check valves...you can either use a little vinegar or dilute some spa down into liquid form and use that
--- End quote ---
Thanks! And plus one.
999:
Strangely I do not have any check valves. There is a tube that comes out of the injector that I have identified as a BCW 2005 injector. The pipe travels to the top of the hot tub, above the waterline and then down to the ozonator. There is no loop in tge pipe either. I was thinking of changing the tubing with a longer length putting in a loop and a chech valve. I cant say that will make my bubbles any bigger or smaller but everything I have read suggests it should be fitted that way. I presume there should still be a check valve with a BCW 2005 injector?
999:
Okay, had another look at my ozonator and piping. I do have two check valves in the tubing at the top of the hot tub. I have pulled the piping off the ozonator and it can feel the suction from it. I may put that in a cup of white vinegar to clean out the tubing, check vlaves and injector.
I have found that there is a flow resrictor on the inlet of the ozonator. When I take this off the bubbles get even bigger....put the flow restrictor back on and the bubbles reduce a bit but it still seems too vigorous.
Navigation
[0] Message Index
[*] Previous page
Go to full version