What's the Best Hot Tub

Author Topic: Jacuzzi Error Code 616  (Read 24675 times)

Swell-Tub

  • Full Member
  • ***
  • Posts: 746
  • Scott
Jacuzzi Error Code 616
« on: May 13, 2013, 11:01:24 am »
My Jacuzzi J-470 is one month out of warranty and has been a fantastic hot tub that I use most everyday. But this last week I have started to get a 616 or blb error code. I can't find a reference to what this code means? Any help would be appreciated.

Thanks,
Scott ???
2008 Jacuzzi J-470

Hot Tub Forum

Jacuzzi Error Code 616
« on: May 13, 2013, 11:01:24 am »

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Jacuzzi Error Code 616
« Reply #1 on: May 13, 2013, 01:38:19 pm »
 Hey Scott long time, hope all is well!!  blb is an error code for time to change the Clear Ray bulb.   Which is odd because I don't think you have that on your spa?

Swell-Tub

  • Full Member
  • ***
  • Posts: 746
  • Scott
Re: Jacuzzi Error Code 616
« Reply #2 on: May 13, 2013, 07:43:32 pm »
What is a clear ray bulb?
2008 Jacuzzi J-470

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Jacuzzi Error Code 616
« Reply #3 on: May 13, 2013, 07:45:50 pm »
 UV light for sanitation, kinda like on ozonator.    If you read through you manual it might tell you how to clear it, if not I can find out for you tomorrow..

 It is reto fittable on your spa. 

Swell-Tub

  • Full Member
  • ***
  • Posts: 746
  • Scott
Re: Jacuzzi Error Code 616
« Reply #4 on: May 14, 2013, 02:33:47 am »
My ozone icon is on but no ozone so I think I will unplug my ozone and replace the check valve to it and see if that removes the error code. Jim if you can tell me how to reset it, that would be great. My Jacuzzi dealer switched brands from Jacuzzi to Marque tubs.
2008 Jacuzzi J-470

Swell-Tub

  • Full Member
  • ***
  • Posts: 746
  • Scott
Re: Jacuzzi Error Code blb
« Reply #5 on: May 15, 2013, 12:15:23 am »
Hey Scott long time, hope all is well!! 

Jim good to see you are still on here. 5 years since I bought my J-470 on your recommendation. Only thing not working is the stereo. It has been a great tub and hope for another 15 years and then I will be to old to get in and out of it. How are things in your neck of the woods?
 ;D
2008 Jacuzzi J-470

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Jacuzzi Error Code 616
« Reply #6 on: May 15, 2013, 02:20:59 pm »
  PM sent
« Last Edit: May 15, 2013, 02:31:50 pm by Jacuzzi Jim »

Hot Tub Forum

Re: Jacuzzi Error Code 616
« Reply #6 on: May 15, 2013, 02:20:59 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42