Brand Specific Forums > Jacuzzi Hot Tubs
source for replacement pump for Jacuzzi wanted...
Jacuzzi Jim:
--- Quote from: mtnsurf on April 28, 2013, 10:35:41 am ---Thanks for your replies. I'll have to take a closer look at the pump. I'm still using the spa with half the jets. The bad pump was tripping the breaker but now just makes a humming noise and no longer trips the breaker and doesn't try to move any water, so I don't run those jets. We inherited the spa from previous home owner, who left the original owners manual, but it doesn't give the specs on the pumps. The manual only gives specs on the circ pump, but that pump still works fine.
The last time I drained & refilled the spa the bad pump started making a clicking noise after I refilled it, and wouldn't actually work for at least a min, but then finally started to move some water & worked fine for a few months after. We had no prior problems with the spa operation.
It's the pump that runs the jets on the right side of the spa as you're looking down at the control panel, if you were standing in front of the spa. The lounger jets and jets in the other corner on same side.
It's a 460 series spa, sold to the original owners in Aug of 2006. I'll take the service panel off & see if I can find any info that may be labeled on the pump ASAP
Thanks again for any help
--- End quote ---
No problem! These prices seem a bit high but also offer's free shipping which for a motor/pump can be spendy because of the weight.
http://jacuzzicare.com/index.php/jacuzzi/jacuzzi-pumps.html
44blues:
No problem! These prices seem a bit high but also offer's free shipping which for a motor/pump can be spendy because of the weight.
http://jacuzzicare.com/index.php/jacuzzi/jacuzzi-pumps.html
[/quote]
Thanks for the link Jim. That looks very helpful. They have a phone number I can call with model and year of my spa, so hopefully they can help me narrow it down. I'll take a look at mine before i call.
Thanks again
Jacuzzi Jim:
I can get you the part number on Monday for which pump you need if you like?
44blues:
--- Quote from: Jacuzzi Jim on April 28, 2013, 02:02:07 pm --- I can get you the part number on Monday for which pump you need if you like?
--- End quote ---
That would be great. I appreciate your help. If you need any more specific info let me know
Jacuzzi Jim:
--- Quote from: mtnsurf on April 28, 2013, 02:06:19 pm ---
--- Quote from: Jacuzzi Jim on April 28, 2013, 02:02:07 pm --- I can get you the part number on Monday for which pump you need if you like?
--- End quote ---
That would be great. I appreciate your help. If you need any more specific info let me know
--- End quote ---
Here is the part numbers 56 frame 220v single speed pumps, pmp 1 is 6500-352 pmp 2 is 6500-365. These should be mounted in the quick clamp realease type thing for easy swap out. Since both are single speed prolly doesn't matter which you order up to you.. They will not come with cords so you will have to move it over to the new pump, same with the air bleed nipple that might be attached to the wet end, can't remember if they had that in 06?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version