Brand Specific Forums > Jacuzzi Hot Tubs

Jacuzzi J350 Dead ?

(1/2) > >>

pratzert:
Hi All.  Happy New Year.

I have a J350 which has been used for the last sevral  nights with no problems.

Today, I went to turn the temp upi to take a soak later and the display is completely blank/dead.

Nothing is working.

I checked the main breaker and it is fine... not tripped.

What can I check next?

Are there some internal fuses I can look at on the control board or in-line ?

If it's nothing simple... I have to call for service before it gets really cold.  Thankfully, the local temperatures in my area are supposed to be in the 40's for the next several days.

Any suggestion are appreciated.

clover:
Indications are you have no power to the spa. 

First check the GFCI by pushing the "Test Button", if it trips you have power up to that point and it could be the main line fuse in the control box in the EQ area.  If it does not trip, you have no power to your GFCI and need to reset your main breaker. 

pratzert:
Hi Clover.

I was able to trip and reset my main gfi breaker on my panel, so I believe I have power thru the breaker and to the tub.

What type of main fuse is inside the EQ area?

What should I look for.

If it is the main fuse inside the tub, one concern is that there was probably some reason the fuse blew so I would have to fugure that out.

But occasionally, fuses do blow becasue of some sort of power spike and even a slight brownout.

If it's the fure, I can at least try to replace it one time to see if it blows again.

Thank for the help.

Jacuzzi Jim:
 It's a slow blow fuse 20 or 25 amp, first place to start.    It's on the circuit board, green with silver tips. 

pratzert:
Jacuzzi Jim,

THANKS !   I'll try to open the tub panel up when I get home from work today and take a look.

I'll try checking the fuses before I call for service, it "may" save me some bucks.

Regards, Tim

Navigation

[0] Message Index

[#] Next page