Brand Specific Forums > Hot Spring Spas
Hot Spot Mallorca - Not Heating
M500sesp:
I have a "Hot Spot" Mallorca Hot tub. It's not heating. Error _._._._._
The error seems to only comes up when I turn the jets on.
It's not heating.
The Jets seem to be functioning correctly, no surging.
I took the filter completely out to make sure there was plenty of water flow.
Any help would be greatly appreciated.
Also does anyone know of a service manual for this model?
Thanks,
Sam
Hot Spring Ace:
--- Quote from: M500sesp on October 22, 2012, 08:15:28 am ---I have a "Hot Spot" Mallorca Hot tub. It's not heating. Error _._._._._
The error seems to only comes up when I turn the jets on.
It's not heating.
The Jets seem to be functioning correctly, no surging.
I took the filter completely out to make sure there was plenty of water flow.
Any help would be greatly appreciated.
Also does anyone know of a service manual for this model?
Thanks,
Sam
--- End quote ---
Based on your statements that leads me to believe its the pressure switch which is easily swapped out.
M500sesp:
Is the pressure switch the one that is mounted, screwed into, the heater? With the small red and black lead?
How would I go about telling if it is bad? I am very capable with an ohm meter etc.
Thanks,
Sam
Jacuzzi Jim:
I don't know that spa but yes that sounds like the pressure switch. You can try jumping the wires together and see what you get..
TwinCitiesHotSpring:
--- Quote from: Jacuzzi Jim on October 22, 2012, 02:35:21 pm --- I don't know that spa but yes that sounds like the pressure switch. You can try jumping the wires together and see what you get..
--- End quote ---
this...bypass the switch to verify if it is bad or not. And to state the obvious DO NOT let your tub operate with a bypassed switch for an extended period of time, they are cheap anyways, probably under $20 online and easily thread in and out with a little teflon tape
Navigation
[0] Message Index
[#] Next page
Go to full version