Brand Specific Forums > Jacuzzi Hot Tubs

Jacuzzi Error "Ono" on pump 2

<< < (3/5) > >>

dfahy:
I will try it tonight.

Thanks
Dave

dfahy:
It seems like the water level was low and the cover was not seated correctly. Still get the Ono after turning the pump off but the pump no longer sounds odd. Some of the jets are not working should I take them out and soak in vinegar or just replace?

Thanks
Dave

Jacuzzi Jim:
 Kind of your call on the jets, replacing them is not cheap but not terrible.   Probably do better going on line price wise, most sites will have pics so you can match up the right jets.   If they are the smaller ones go with the directional vs the spinner type.   Way longer life span. 

dfahy:
Will do on the jets, any place better than the other online.

Had the tub getting hotter when it reached 85 the gfci shut off when I turned it back on the Oh appeared, is that just the heat sensor?

I appreciate your help.

Dave

Jacuzzi Jim:
 More than likely a bad temp sensor.  We replace my 1 HL (high limit) a year if that. 

Navigation

[0] Message Index

[#] Next page

[*] Previous page