Original > Hot Tub Forum
Buying now and need advice
doodoo:
I sank my tub 18'' into my deck which leaves about 19'' of tub exposed with a full access on the main side which holds all of the mechnicals. it makes it much easier getting in and out of the tub and much more attractive from my deck.
The other three sides could all be accessed if it came down to it but would require a bit more work. Lot,s of planning before building but the end product is perfect.
My recommendation is don't be afraid to build it in but like the experienced fellows before me said, from their vantage point in servicing, access is a must.
Holly:
Thanks, all, for the great replies. ZzTop (great nick! I've seen the band live a few times), I notice you didn't mention Dimension One. That's one of the dealers I was planning to visit since they're the closest to my home and have been in business here for a long time. Have you heard of problems with their products?
If I've understood your reply correctly, provided I get a reputable dealer for one of the best manufacturers, would all the hot tubs have about equal ease and frequency of routine maintenance? I'd figured a CD ozinator might reduce the need of chemicals. I've heard there are two kinds of CD ozinators, a chip-type and a cell-type, with the latter requiring less maintenance. Is that true? Do all the top tier manufacturers have this option, and the option of the cover lifter with gas shocks?
Spahappy, in regards to sinking the hot tub in the deck, my builder was planning to leave it exposed at the top to the extent that I could have one foot on the deck and the other foot on the chair of the tub and be standing level, if that makes sense. Since it's a second story deck, the rest of the hot tub would be completely exposed under the deck. From the ground beneath the deck you'd be looking up at the bottom of the tub about two feet or so above your head. Does this sound like it would provide enough access for service?
Good point about the issue of perhaps someday wanting to replace the hot tub with one of different dimensions. I will give that some thought, thank you. At least I don't have to worry about resale and a new owner not wanting a hot tub. This will be my last home. Thanks for the congratulations, I couldn't be more excited about this.
ZzTop:
--- Quote ---Thanks, all, for the great replies. ZzTop (great nick! I've seen the band live a few times), I notice you didn't mention Dimension One. That's one of the dealers I was planning to visit since they're the closest to my home and have been in business here for a long time. Have you heard of problems with their products?
If I've understood your reply correctly, provided I get a reputable dealer for one of the best manufacturers, would all the hot tubs have about equal ease and frequency of routine maintenance? I'd figured a CD ozinator might reduce the need of chemicals. I've heard there are two kinds of CD ozinators, a chip-type and a cell-type, with the latter requiring less maintenance. Is that true? Do all the top tier manufacturers have this option, and the option of the cover lifter with gas shocks?
--- End quote ---
Holly, Dimension One is on my top 6 list and is a very good product. Having a dealer near by is a real plus.
Yes all of the tubs are about equal in ease and frequency of routine maintenance.
Re Ozinators, Yes most all the top tier manufacturers offer this option. The cd type seems to be the most popular. Again I suggest you discuss this with your dealer.
The cover lifter is an aftermarket item. You need to discuss this with the dealer you choose to buy from and get whatever mounting and clearance information you will require for installation and to make it work. Note there will probaby will be a clearance issue that you must be aware of and discuss with your builder after you get installation and mounting information from your dealer.
Regards, Zz
Navigation
[0] Message Index
[*] Previous page
Go to full version