Brand Specific Forums > Jacuzzi Hot Tubs
does your jacuzzi filter cover fit properly/squeek/float?
smileycanuck:
Hi all, we have wet tested the J335 and noticed that the filter cover was loose and squeeking. This is a deal breaker for us. Has this happened to anyone else? The dealer says he has never had a problem. My hubby jiggled around the dry models in the showroom and they all seemed to fit loose.
Thanks in advance!
hotter25:
I have never seen this. Generally, they have some sort of mechanism that secures the cover. However, depending on where you live this might not be the case. In the midwest, we have some pretty harsh weather both in the spring and fall. Maybe this is a geographical difference. Have you considered hot tubs memphis?
Spatech_tuo:
--- Quote from: smileycanuck on November 10, 2011, 10:32:21 pm ---Hi all, we have wet tested the J335 and noticed that the filter cover was loose and squeeking. This is a deal breaker for us. Has this happened to anyone else? The dealer says he has never had a problem. My hubby jiggled around the dry models in the showroom and they all seemed to fit loose.
Thanks in advance!
--- End quote ---
They shouldn't be loose and I'd find it annoying too. Per the other response, I'm going to go out on a limb and say the weather has nothing to do with this (more like their manufacturing process needs some tightening).
smileycanuck:
after we wet tested, my hubby went around and jiggled all of the ones in the showroom and only the "big boys" seems to fit tight. I have read on other sites that people had this problem and one guy had to get creative to stop it as the dealer did nothing. We didn't end up going with Jacuzzi for this reason and for the lack of cooling off seats. But their jets win hands down from any tub we tested. For us, different levels were more important so we ended up going with a coast zenith (for a lot less money).
smileycanuck:
i was referring to the highest series of jacuzzi. And even then the filter lids did not fit tight. We saw a used J335 and the filter cover would lift off when the jets started....this one didn't squeak, but the one in the showroom did.
Navigation
[0] Message Index
[#] Next page
Go to full version