Brand Specific Forums > Marquis Hot Tubs

First Hot Tub (Marquis Reward 2006)

<< < (3/3)

Spatech_tuo:

--- Quote from: nj on August 01, 2011, 09:25:50 am ---An update on my saga.  Well we had our contractor wire up the electrical for the hot tub, and somehow he managed to "confuse" the wires and put a hot where the neutral should be, so needless to say the tub didnt work. I was afraid he had fried the board, but basically just a fuse blown. Unfortunately, it was the soldered-on type fuse, so another complication. He was able to replace it and solder on another fuse and now the tub is up and running.

Everything seems to be working with the exception of 2 jets. These are not part of the same area, so not sure whats going on. Any suggestions would be helpful. Both pumps working fine, controls working fine, heater working well. No leaks. So all in all after some unexpected surprises and an incompetent electrician, we are good to go.

--- End quote ---

Some jets turn on/off at the jet itself. Have you tried rotating the jet face. Is there a diverter in the spa?

rick_in_cleveland:
as you stand where the pumps are and you are looking at the tub (filters will be at 3 O'Clock) which jets aren't working. 

Navigation

[0] Message Index

[*] Previous page