Brand Specific Forums > Jacuzzi Hot Tubs

Jacuzzi Help Needed !

(1/3) > >>

Zman2334:
This is my first post so hopefully someone has an answer for me. I have a Jacuzzi Hot Tub ,Model # F280000, MFG# 9506-04, Serial # 647120.  The display keeps coming up OH I  know this means overheat protection  but, what could be wrong and where should I start in fixing this. It isnt a false reading either because the water does get too Hot to get in. I read elsewhere that it could be clogged filters so they were just replaced a week ago. All was fine then a few days later it started reading OH again. I would much rather do this repair myself so I don't get nickel and dimed by a professional. Any help would be greatly appreciated. Thanks

ejf The Spa Guy:
could be a couple of things. whats happening is the temp sensor going to the tub and the one on the heater are way off in temp, when it goes to  OH its shutting off the heater,, so could be temp sensor, ,, I see you replaced the filters, are there any prescreens under the filter or have you checked the suction fittings,,,What i would also do is call your local Jacuzzi dealer and just ask him some questions, he may be able to tell you  better what to check and go from there.

Jet Sitter:
zman - As a consumer, I too would prefer to do the repair myself, rather than pay a service man for a repair that is not covered by warranty, assuming that it is within my abilities.  If you must pay a professional however, it may be that you are paying him a fair price for his work, rather than being "nickel and dimed".

Jacuzzi Jim:
 Looking at those numbers he put up that spa sounds like it may have been a older Home Depot spa?  Either way its well out of warranty. 

 Sounds like what ejf could be happening.

hottubdan:
If older Home Depot type, many Jacuzzi dealers would not be familiar with it.  Is that correct, Jim?

Navigation

[0] Message Index

[#] Next page